|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| I put a set of freeer flowing pipes on my 2002 Bonneville America - I shimmed up the needles but after drilling out the anti-tamper plugs for the pilot screws I found the left one set at three full turns and the right at 1 1/2 - everything I've read says that you should never turn out the pilot screws more than 2 turns. Does anyone know the stock sizes for the pilot and main jets?
Kevin Fred |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| I changed out the stock silencers on my bonnie to the off roads by triumph. The main jets need to be replaced with larger ones. I think #115 is correct.
Ray |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| 110 and 40. About 2 1/2 turns out is just right!
Larry Sheppard |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| 120/42 on the stock mains and pilots!
Jaymo54 |
| |
|
|