|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| | how do you do a whellie on a stock 2003 xr 50?? ANSWER PLEASE!!!!!!!! |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| Put it in first gear, then lean back and rev the engine... an xr50 isn't really the best bike to wheely either, it doesn't have any power.
Cory |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| Ok, I have a basically stock 50 also. It's not a hard thing to do, it just depends on how much you as a rider weigh, and how much gas your giving it. If you want to do like low speed stunt type wheelies, put your feet on the groud and almost hold the dirtbike back and gun-it.(in 1st) If you want to do like a speed wheelie. Sit as far as you can back, you should feel the two frame prongs underneath your fender. Get the revs low, or really high. Mid range isn't too good. Just pull back on the bars and give it some. If you want to know how to do a standing wheelie( stand on you seat wheelie) email me element50tuner@yahoo.com
Kyle |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| It doesnt have much power, the way i do it is i get it at a high rev in second gear, then i put the 50 in clutch(holding the gear shifter up) Then i rev the engines a little more and release the shifter, it gets you a wheelie for about 40-50 ft. if your showing of, your friends will certainly be amazed
Brett |
| |
| | | Supreme Being
Group: Forum Members
Last Login: 2/12/2008 12:42:20 PM
Posts: 125, Visits: 41 |
| easy put it in nuetral rev it and pop it into first it may be bad for the transmission but its hella fun
|
| |
|
|