PowerSports Network Forum
PowerSports Network Forum
Home      Members   Calendar
Welcome Guest ( Login | Register )
      



Author
Message
Posted 8/25/2009 2:43:18 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 8/25/2009 2:37:48 AM
Posts: 3, Visits: 1
Transmissions. The most simplistic drive mechanism of stand-up scooters is the "spindle" drive. This drive mechanism puts an extension of the engine's output shaft, the spindle, in direct contact with the rear tire of the scooter. In order to function correctly, the tire must have a clean, dry surface which the spindle will be able to effectively interact with. Scooters with this type of direct transmission can be pull started with the rear wheel off of the ground or "bump" started by forcefully pushing the scooter with the rear tire in contact with the ground.

Wisconsin Health Insurance
cheap insurance
Post #174688
« Prev Topic | Next Topic »


Reading This TopicExpand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.
Forum Moderators: Forum Moderator

PermissionsExpand / Collapse

All times are GMT -6:00, Time now is 9:45pm

Powered By InstantForum.NET v4.1.4 © 2009
Execution: 0.422. 7 queries. Compression Enabled.
ADVERTISER INFORMATION       PRIVACY STATEMENT       DISCLAIMER       POLICY       DEALER INFORMATION
© Copyright 2009, PowerSports Network Inc. All rights reserved.