PowerSports Network Forum
PowerSports Network Forum
Home      Members   Calendar
Welcome Guest ( Login | Register )
      



2005 Kawasaki KX250FExpand / Collapse
Author
Message
Posted 12/15/2008 11:28:37 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 12/15/2008 11:34:08 PM
Posts: 1, Visits: 74
Hi everyone i am having a compression problem with my bike. I replaced the piston rings honed the cylinder an micd the cylinder and piston and it is in spec. I also replaced and lapped the intake valves and reshimed the cam clearance. I used all new gaskets and buttoned it up. I made sure I set the timing to the mechanical timing mark and have 28 pins between the timing marks on the cams. The timing chain is also new and the tensioner is well adjusted. If anyone has any suggestions on what I might be missing please let me know. The bike won't run at all it only pops a few times but wont start. Thankyou for any help.
Post #173460
« Prev Topic | Next Topic »


Reading This TopicExpand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.
Forum Moderators: Forum Moderator

PermissionsExpand / Collapse

All times are GMT -6:00, Time now is 11:20pm

Powered By InstantForum.NET v4.1.4 © 2009
Execution: 0.359. 7 queries. Compression Enabled.
ADVERTISER INFORMATION       PRIVACY STATEMENT       DISCLAIMER       POLICY       DEALER INFORMATION
© Copyright 2009, PowerSports Network Inc. All rights reserved.