PowerSports Network Forum
PowerSports Network Forum
Home      Members   Calendar
Welcome Guest ( Login | Register )
      



Author
Message
Posted 10/23/2007 6:00:51 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 10/23/2007 5:53:42 PM
Posts: 2, Visits: 5
My 05 eiger 400 will be running and stop firing. I found that you can unplug the wires to the coil and plug them back in and it will run again for a while. It arc's and will shock you when you plug the wires back into the coil. I took it to a shop and they said it had a bad CDI and could get one in a week. Four weeks later they call and say it also has a bad stator. They think the stator problem fried the CDI. A new CDI and Stator and Labor will have my bill up to $1,000. My bill stands at about $500 with new CDI and labor and I'm thinking of cutting my loses and taking it out of that shop. Anyone seen this problem before?
Post #169634
« Prev Topic | Next Topic »


Reading This TopicExpand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.
Forum Moderators: Forum Moderator

PermissionsExpand / Collapse

All times are GMT -6:00, Time now is 1:55pm

Powered By InstantForum.NET v4.1.4 © 2008
Execution: 0.328. 10 queries. Compression Enabled.
ADVERTISER INFORMATION       PRIVACY STATEMENT       COPYRIGHT       TERMS       DEALER INFORMATION
© Copyright 2008, PowerSports Network Inc. All rights reserved.