|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| Has anybody out there put the 650 Burgman on a 4x8 Trailer with a wooden bed ! I can't figure out were to put the tie down straps on the scooter ! The back end on the back handles ! The front is the problem putting the tie down straps over the plastic up top don't seem like a good Idea ? Any help would be appreciated... Thank You ... Jack
Jack |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| look above the the front fender near the horn ,the frame has a area that you can use a loop strap on each side of the fender. put the tie down hook and pull it on a angle so that it will not touch the fender. you will need a eye bolt to fasten to the floor of the trailer. on the right rear shock use a loop strap around lower end of the shock where the bolt goes through and use a tie down strap to the trailer on, the left side under the rear panel,there is a bar that you can tie a loop strap around ,the loop strap needs to be long ,so that it will clear the rear panel. I USE THE RACHET TIE DOWNS TO PULL THE SCOOTER DOWN
alvin |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| On another scooter I used straps that wrapped around the handlebars and had a loop for the hooks on the tie down. This worked very well and stabelized the bike in transit.
Lloyd |
| |
|
|