|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| Wwhat is the little yellow button for, on the back of the left side handle grip? It has "pass" written on the top, and the button is just below on the back side. I pushed it but nothing happened, no matter how fast I was going. Please post to the Yahoo an650 Burgman News Group. Thanks
archer livengood |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| It appears it is a flash to pass switch. It momentarily flashes the headlights.
Mike R |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| Flasher switch for flashing headlights when passing, warning, etc.
Gary Smith |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| It flashes the high beems on your bike so you can get a cars attention. (mostly used to pass someone.
Al Scretchen |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| It flashes your lights with a quickness to let the others know your going to make a move
Sal |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| | when you are ridding with your lights on low beam. you can press the yellow button go flash someone. Just a curtisouy to let the know you are passing. It just flashis quickly on and off |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| | The yellow button is used to flash the headlights when you want to pass if someone is in front of you in the passing lane. You cannot have the highbeams on for this. Only works with low beam. Works just like the headlight flashers on a car. |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| the yellow button that is hit by your thumb is the high beam. In order to use the pass button, you will have to hit the button that has a/m on it. When u do this your cluster will change from D to 1. This will change the shifting to manual mode. Up is for shifting up and down is for downshifting.
alan au |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,166, Visits: 2 |
| The button is for flashing the high beams to pass in europe
John Filippelli |
| |
| | |
|