|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| | does anyone know how to override the reverse limiter on the auto eiger OR AM I THE ONLY PERSON THAT HATES THE LIMITER IN REVERSE??????? |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,167, Visits: 2 |
| | The only thing the reverse is good for is hard surfaces. Dont get in a bind because that reverse limiter SUX! I havent found any kind of bypass. If someone knows of one please let us know. 06 Eiger |
| |
| | | Forum Newbie
Group: Forum Members
Last Login: 1/1/2008 7:10:53 PM
Posts: 1, Visits: 1 |
| | I found a way to bypass the reverse limiter. I have it listed on ebay. or you can email me pjrem@aol.com |
| |
| | | Forum Newbie
Group: Forum Members
Last Login: 2/22/2008 4:37:51 PM
Posts: 1, Visits: 1 |
| 1) Locate the c.d.i. on the left rear of the Eiger. It is mounted to the front side of tool box.
2) Expose approx. 8" of the wires going to the c.d.i.
3) Locate the white wire and the blue/red wire. Make sure the white wire is a solid white with no tracer colors.
Make sure the blue wire has a red tracer.
4) Cut the blue/red wire. Seal the end that goes to the c.d.i. with tape or shrink tubing. This wire wll not be used. Strip 1/2" of the blue/red wire that goes toward the front of the eiger.
5) Solder white stripe side(cathode)of the diode to the ble/red wire.
Seal connection with tape or shrink tubing.
6) Strip, but do not cut, the white wire approx. 1/2". solder the black(anode)end of the diode to the white wire.
Wires should lay flat together, no kinks or bends.
7) Seal connection with tape. Reinstall wire loom and secure to frame.
Radioshack diode: IN4001
.99 cents
|
| |
|
|