|
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,169, Visits: 2 |
| | how the heck do you dain the oil in a blast, there are three plugs on the bottom, two on the left, both for the clutch it looks like, then one small one for the tranny in a sump, but i cannot find how to drain the oil, i am totally stumped |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,169, Visits: 2 |
| Pull the plugs from the drain tubes found in the left side passenger footpeg support. The lower drains the oil, the upper drains the breather tube in which oil may have accumulated. Then replace the plugs, put 1.5 quarts of oil in the tank, run the engine, and then top up the last half quart of oil. This is the procedure for the 2003 Buell Blast.
Arnold Hammari |
| |
| | |
Group: Forum Members
Last Login: 3/5/2007 10:44:31 AM
Posts: -1,169, Visits: 2 |
| | Check out BCrider magazine online |
| |
| | | Forum Newbie
Group: Forum Members
Last Login: 8/24/2007 1:40:58 PM
Posts: 5, Visits: 5 |
| | What about changing the clutch and tranny oil, which drain plugs and where do you refill , how much , what oil is best for these trannys. |
| |
|
|